Francis turbine
![Francis turbine](http://www.b2bage.com/images/no_picture.gif)
100KW to 50MW Francis turbine
Applicable Head: 15-300 meters.
Applicable Flow: 0.2m3/s - 20m3/s
Standard: GB standard, IEC
100KW to 50MW Francis turbine, Custom Made Solutions
Francis turbine is applied to Low head and big flow power plant. The flow run axially and radially into the runner and discharge into draft tube.
Horizontal shaft arrangement is generally applied to under 2000KW unit, for 2000KW about, usually vertical shaft arrangement is used.
Francis turbine has compact structure, and high average efficiency. It is one of the most used turbine type.
In order to get fittest proposal, please provide Project data:
For turbine
1. Water Head: 11 m to 420m
2. Flow: 0.5 to 300 m3/s
For generator
1. Frequency: 50/60 Hz
2. Voltage: 400V/6.3KV/10.5KV/
3. Grid Voltage: 11KV/33KV/...
Other turbine generator maybe proposed according to our engineer's judgement and experinence.
You can refers to the Model Application Diagram (at bottom of this page) to know how to choose fittest type of turbine.
Francis turbine Runner
Francis Turbine Regulation Ring
Francis Turbine Spiral Case
Model Selection Principle Diagram